UTC 2412-8
NATO Tractor to USA Trailer Converter
UTC 2412-8 is a direct electrical interface between a 24 Volt military tractor and a USA commercial trailer. The UTC 2412-8 accepts 24 Volt inputs from a NATO 12 pin connector. It converts these inputs to the appropriate 12 Volt levels that it makes available to the trailer via a standard SAE 560 connector (as would appear on a commercial tractor).
Total Conversion
UTC 2412-8 electrical interface incorporates 6 independent circuits that supply a total of up to 800 watts of 12 Volt power for all USA commercial trailer demands.
Quick Installation
UTC 2412-8 electrical interface can be installed swiftly because it is designed to accept standard connectors and requires no hard wiring.
Reliable
UTC 2412-8 incorporates highly efficient circuitry. This translates into cool operation, high reliability, and long life expectancy. UTC 2412-8 is designed to operate over a wide temperature range and under rigorous vibration and shock conditions. Its ruggedness is enhanced by weather proofing and electronic protection against abnormal conditions and output overloads.
Compact
UTC 2412-8 is compact, weighing only 17 pounds. It has a low physical profile and can easily be mounted on tractor or trailer bodies.
FOR NEGATIVELY GROUNDED SYSTEMS ONLY
Electrical Configuration
Electrical Specifiations
| Input Voltage: |
22-29 VDC (normal) |
| Input Current: |
45 Amps. Max Total |
| Input Circuits: |
6 independent circuits |
| Output Voltage: |
13.2 +.- 0.5 VDC |
| Output Current: |
See Table #1 Below |
| Output Regulation: |
0.2 Volts over entire load and input voltage range |
| Output Ripple: |
100 mV RMS @ -40C, worst case/ 50 mV @0C |
| Overload Protection: |
Internal electronic protection |
| Operating Temperature: |
-40C to +60C |
| Efficiency: |
90% |
Output Current:
Pin |
Function |
Current Rating (amps) |
Black |
Clearance & Marker Lights |
10A |
Yellow |
Left Hand Turn Signal |
10A |
Red |
Stop Lights |
10A |
Blue |
ABS |
10A |
Green |
Right Hand Turn Signal |
10A |
Brown |
Tail & License Plate |
15A |
White |
Ground |
|
Mechanical Specifications:
| Input Connection: |
12 pin NATO Connector MS 75021-1 |
| Output Connection: |
7 Pin SAE 560 Connector |
| Size: (L x W x H): |
21 x 7 x 3 (inches) / 54 x 18 x 8 (cm.) |
| Weight: |
17 lb. - 8 Kg. |
| Construction: |
Aluminum housing with steel end caps |
| Mounting: |
6 position base mounting flange with clearance for 1/4 in bolts. |
|
