| Output Voltage: |
26.4 Nominal |
| Output Voltage Adjust Range: |
24.5 VDC to 28.0 VDC |
| Continuous Max Load Amps: |
40 ADC @ 60C ambient (Input 26.4) |
| Maximum Power Dissipation: |
60 Watts @ Full Load (40A, 26.4 VDC out) |
| Maximum Input Current: |
90 A (12 VDC in) |
| Overload Protection (primary) |
Electronically current limited |
| Overload Protection (primary) |
Magnetic Circuit Breakers at Input
|
| Cooling: |
Convection and Forced Air |
| |
Thermostat Controlled Fan activates at
skin temperature of 60C |
| |
|
| Output Ripple Voltage: |
10 mV RMS (20C to 75C) |
| |
50 mV RMS (-30C) |
| Input Voltage Range: |
11 VDC to 15 VDC |
| Input Output Isolation: |
Input and Output returns are common |
| |
|
Low Voltage Cutout Circuit: |
| Low Voltage Cutout Point: |
Adjustable from 10.5 VDC to 13 VDC |
| Low Voltage Cutout Hysteresis: |
1.2 VDC @ 13.0 V / 0.9 VDC @ 10.5 VDC |
| |
|
Activation Circuits: |
|
| 1) May be activated through a command terminal. |
| 2) May be turned on in sections by using circuit breakers on front panel. |
| |
|
| |
|
| Ambient Operating Temperature: |
-30C to + 60C |
| Maximum Humidity: |
100% non condensing |
| Maximum Elevation: |
6000 meters above sea level |
| |
|
Mechanical Specifications: |
| Dimensions: |
14.0 L x 7.0W x 3.5 H (inches) |
| Shipping Weight: |
8 lb. |
| Construction: |
Aluminum base with painted steel wrap around |
| Mounting Method: |
#12 Hardware via front and rear mounting flanges |
| Mounting Centers: |
13.5 x 3.87 (inches) |
| Hook Up: |
3 Position Splicer Terminal Blocks |
